Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

PRODUCTS

GW6B outdoor HV AC disconnect switch


ChinaElectrical presents the GW6B 126kV-252kV-363kV-420kV Series Disconnector for high-voltage applications. These disconnectors are designed to provide reliable isolation and switching in power systems. With their robust construction and high performance, they are essential for the safe operation of the electrical grid. Trust ChinaElectrical for your high-voltage disconnector needs.
Description

Product Overview:GW6B outdoor HV AC disconnect switch

GW6B disconnect switch is a kind of outdoor HV electricity transmission equipment at three-phase AC frequency of50Hz/60Hz. lt is used for breaking or connecting Hv lines under no loads so that these lines can be changed and connected and the way the electricity runs is changed, n addition, it can be used to exercise safe electrical insulation for such HV electric apparatuses as bus and breaker. The switch can open and close inductance/capacitance current and is able to open and close the bus to switch current.

This product is of the single-post bi-arm vertical telescope type (scissor-type) and suitable for the bus's disconnect switch it can be laid out directly under the bus, thus occupying a small area. ts effect of saving energy can be prominent at the substation where double bus lines are accompanied by the bypass bus.The disconnect switch is accompanied by a JW10 earthing switch which will be used for the bus grounding at the lower layer, The grounding of the bus line at the upper layer requires the use of an independent earthing switch. 363kV and 550kv disconnect switch and earthing switch are equipped with the sRcJ8 motor actuator for the single pole operation. Meanwhile, the tri-pole linkage can be achieved. The 126kV and 252kV disconnect switches adopt SRcJ3 motor-based actuator to realize the tri-pole linkage. The earthing switch adopts SRCS manual actuator to actualize tri-pole linkage.

This disconnect switch has passed the verification by the review procedure organized by China Machinery industry Federation that the product structure and performance satisfy the requirements on perfection, and product's performance indices have reached the internally level of the same kinds of products.

Specifications and Parameters:

ltem unit parameters
Product model GW6B-126D(G·W) GW6B-145D(G·W) GW6B-252D(G·W) GW6B-420D(G·W) GW6B-550D(W)
Rated voltage kV 126 145 252 420 550
Rated insulating level Rated Power Frequency
Withstand Voltage(1min)
To earth / phase lo phase kV 230 275 460 520 740
Across isolating device 230+(70) 315 460+(145) 610 740+(315)
Rated Lightening impulse withstand voltage To earth / phase lo phase 550 650 1050 1425 1675
Across isolating device 550+(100) 750 1050+(200) 1425+(240) 1675+(450)
Rated operating impulse withstand voltage (peak) To earth / phase lo phase —— —— —— 1050/1575 1300/1950
Across isolating device —— —— —— 900(+345) 1175+(450)
Rated Frequency Hz 50/60
Rated Current A 2000,3150 2000,3150 2000,2500,3150,
4000,5000
4000 4000
Raled peak withstand current kA 125 104 125/160 164 160
Rated short-time withstand current kA 50 40 50/63 63 63
Rated duration of short circuit s 3 3 3 2 3
Rated terminal Mechanical load Horizontal-longitudinal N 1250 1250 2000 4000 4000
Horizontal-lateral 750 800 1500 2000 2000
Vertical force 1000 1000 1250 1500 2000
Bus-transfer current switching capability of disconnectors mm 100V,1600A,
100times
100V,1600A,
100times
435V,2400A,
100times
350V,2400A,100times
Rated coniact area Longitudinal displacement of guidewires
(hard guidewire/soft guidewire)
100/100 100/100 150/200 150/200 175/200
Horizontal offset in tolal (hard guidewire/soft guidewire) 100/350 100/350 150/500 15/500 175/600
Vertical offset (hard guidewire/soft guidewire) 100/200,300 100/200,300 150/250,450 150/300,500 175/400,500
isolating switch small Current opening/closing capacity Capacitive current A 1 1 1 1 2
inductive current  A 0.5 0.5 0.5 0.5 1
RIV (radio interference voltage)  μv ≤500 ≤500 ≤500 ≤2500 ≤500
Creepage distances mm 3150/3906 3625/4495 6300/7812 10500/13020 13750
Motor operating mechanism Model SRCJ7 SRCJ3 SRCJ8
Motor voltage V AC380/DC220
Control circuit's voltage V AC220/DC22/DC110
Opening time and closing time s 12±1 16±1
Output shaft rotation 135° 180°
Manual operating
mechanism
Model SRCS
Control circuit's voltage V AC220,DC220,DC110

Product Features:

  • Superior conductance system

    With open structure, conductor is laid out in the middle of the transmission base while the main rod and reverse connecting rod are installed outside. Balancing spring is sealed with aluminum cover and transmission parts needing debugging are exposed for easy installation and debugging. dust prevention. Add a dust cover to bearing and adopt seal structure externally.

  • Contact forceps can cover a large area of rated contact, This product is in the double arm telescopic (scissor-type) structure, The forceps of the moving contact cover a large area of rated contact, particularly applicable to soft bus line, and also to hard bus line.

  • Open gear box, which has a good visibility, is convenient for installation, debugging and maintenance, The main crank arm is combined with operating flange to reduce the transmission link and the height of transmission base, which can improve the transmission efficiency and reliability. The rotation shaft is designed as double bearing structure so that the transmission is flexible and reliable.

  • Structural design: the separation of machines from power.The design concept is the separation of machines from power, that is, the conductive elements, springs and mechanical driving elements are mutually isolated to prevent current from passing through springs and mechanical driving elements. Ln this way, the stability of the driving elements can be enhanced.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
gw6b outdoor hv ac disconnect switch-90